Injection Moulding Machine
Injection moulding machine is used to produce syringe barrel and plunger in any specification and design. We have complete sizes of syringe part injection moulding machines; we will choose the most suitable machine according to customers’ detailed requirement.
Advantages: –
- Controlled by microcomputer, which makes the work reliable and automatic in high level.
- Using Screw for feeding raw material, allowing processing of various materials. Strong plasticizing ability makes the injection speed high.
- Using resistance heating coils to heat the barrel, adopting cold screw protecting device, the screw will not operate until the temperature reaches the setting value.
- Adopts electrical and mechanical double safety device. The mold will not clamp when the door is open, which makes the production process safer and reliable.
- Multi-point hydraulic ejector device can choose the suitable number of ejector rod according to the actual working needs. It makes the demolding more even.
- Mould adjustment device is drive by hydraulic controlled gear transmission, which is easy for operation.
Syringe Barrel
Syringe Plunger
Syringe Gasket
Main Technical Parameters
| Model | IM -100 | IM-130A | IM-160A | ||||||||||||
| INJECTION | Unit | A | B | A | B | A | B | ||||||||
| Screw Diameter | mm | 36 | 38 | 38 | 40 | 42 | 45 | ||||||||
| Shot Size | cm³ | 143 | 180 | 210 | 228 | 318 | 362 | ||||||||
| Shot Weight | g | 128 | 162 | 188 | 205 | 386 | 326 | ||||||||
| Injection Pressure | Mpa | 183 | 164 | 176 | 160 | 174 | 151 | ||||||||
| Injection Rate | g/s | 90 | 98 | 95 | 100 | 135 | 155 | ||||||||
| Screw L/D Ratio | L/D | 21.6 | 20.5 | 22.8 | 21.7 | 22.3 | 20.8 | ||||||||
| Screw Speed | r.p.m | 0-190 | 0-190 | 0-190 | |||||||||||
| Nozzle Diameter | Srmm | 10 | 10 | 10 | |||||||||||
| CLAMPING UNIT | |||||||||||||||
| Clamp Tonnage | KN | 1000 | 1320 | 1650 | |||||||||||
| Toggle Stroke | mm | 320 | 350 | 400 | |||||||||||
| Mould Thickness | mm | 150-400 | 150-420 | 170-440 | |||||||||||
| Space Between Tie-bars | mm | 385×350 | 410×375 | 455×425 | |||||||||||
| Ejector Stroke | mm | 125 | 135 | 155 | |||||||||||
| Ejector Tonnage | KN | 50 | 50 | 70 | |||||||||||
| Ejector Number | Piece | 5 | 5 | 5 | |||||||||||
| Hole Diameter | mm | 100 | 100 | 125 | |||||||||||
| OTHERS | |||||||||||||||
| Heat Power | KW | 7.6 | 8.2 | 8.2 | |||||||||||
| Max. Pump Pressure | MPa | 16 | 16 | 16 | |||||||||||
| Pump Motor Power | KW | 11 | 13 | 15 | |||||||||||
| Valve Size | mm | 10 | 10 | 16 | |||||||||||
| Machine Dimension | m | 4.3×1.5×1.6 | 4.5×1.6×1.7 | 5.0×1.6×1.7 | |||||||||||
| Machine Weight | t | 3.4 | 3.9 | 5.0 | |||||||||||
| Oil Tank Capacity | L | 180 | 200 | 250 | |||||||||||
